Test the Hp Officejet 3630 printers for paper jams first. To resolve the HP E3 error, switch on the printer by pressing the power button. Then open the external door to the HP printer. Gently click the ink cartridges out of the holes to clear them.
Until gently inserting the cartridge into the slot, check it for any problems. After that, close the inkjet printer access door. Switch on the printer by plugging the power cord directly into the printer to resolve the HP E3 error.
Clear the Clogged Document (method 1)
One of four positions can be used to clear the jammed file. Examine any places where the paper may get stuck before attempting to remove it. Now try printing the paper once more.
Clean the jammed paper from the output tray, input tray, printer frame, and access area for ink cartridges. If the error still occurs after you’ve removed the jammed paper from all sides, you’ll need to move on to the next step to fix HP printer error e3.
Method 2: Remove and reinstall the cartridges
Installing the cartridges incorrectly or incorrectly will result in the HP printer error e3. To ensure that the ink cartridges are properly mounted, remove and reinstall them. Go ahead and print a new one now.
• To turn on the printer, press the power button.
• Go outside and open the door.
• After that, you must open the ink cartridge access door.
• The ink cartridge-carrying carriage will be shifted to the printer’s canter. Wait for it to stop working.
• Gently press the ink cartridges downwards to open them.
• To correct HP printer error e3, take the cartridge out of its slot and pull it toward you.
• Insert the cartridges into the empty slot and press down on them until they snap.
• Shut the exterior door first, then the access door.
Method 3: Connect the printer’s power source to the printer’s wire.
• Take the printer’s wire out of the printer’s grip.
• Surge suppressors must be unplugged from the power supply.
• Attach your printer’s power cable directly to the power source to fix HP printer error e3.
• Next, attach the printer’s power cable to the printer’s hand.
• Switch on the printer right now.
• If the issue persists, you should move on to the next step.
Reset the printer (method 4)
• Turn on your printer if it isn’t already on.
• Wait for the printer to go into standby mode.
• After your printer has been switched on, disconnect the wire from the hand.
• Detach the power supply from the main printer cable.
• Remove it from the power supply for a minute before reconnecting it.
• Next, attach the printer’s power cable to the printer’s hand.
• Turn on the printer if it does not turn on automatically.
After that, you can print with your printer. The printer should be serviced if the HP printer error e3 continues. We hope that the above solution assisted you in fixing your HP printer E3 error.
In the HP Desk Jet 3630 printer, what does the E3 error code mean?
In the HP Deskjet 3630 printer, the E3 error code shows a carriage jam, which may mean a paper jam. Finally, the error can be identified using the blinking error light, paper error light, ink alert light, and Restart light.
Take any single piece of paper from the Input Tray and discard it.
In this case, you can use the flashlight to find and clear the jammed document. After that, look for any jammed files in the input tray, output tray, and ink carriage. Then, if any paper is discovered, remove it carefully before pressing the cancel button. Now the printer can try to correct the HP E3 error on its own.
Check to see if your carriage is free-moving.
To get to the ink cartridges, open the access door. Give the carriage enough time to come to a full stop. Then search the field for any paper jams. If you spot any, remove them with both hands to avoid further tearing. After that, switch the cartridge to the left and right. Finally, search for any documents that are damaged and discard them.
Make sure the ink cartridges are working properly.
To begin, turn on the printer and open the ink cartridge access door. You must wait until the cartridge has fully stopped. Likewise, remove the ink cartridges from the ink slot. Place the cartridges to the side after that. Then, in an upward motion, re-insert them into the slot. Finally, check to see if the HP E3 error has been fixed by closing the ink cartridge access door.
The relationship that is direct
The power cord for the HP printer must be unplugged. If the power strips are still connected, unplug them. The power cable should then be inserted directly into the wall socket. The printer should then be linked to a wall outlet directly. Then use the HP Deskjet 3630 printer to print. If the issue persists, send the printer in for service to correct the HP E3 error.
• Delete any clogged paper from the Output Tray.
• To begin, remove the jammed paper from the output tray and double-check that the cartridge is in good working order.
• is able to drive about freely. Finally, remove any loose or stuck files from the output tray.
What do you do if the E3 error occurs but there is no paper loaded in the printer?
We need to find out where the problem is coming from when you get an E3 error and your HP printer doesn’t have any paper ready. Follow the steps below to overcome the HP E3 error.
• Unplug the printer immediately and wait a few minutes before turning it back on.
• There’s a risk that something is obstructing the paper path, causing the mistake.
• After that, remove the cartridges with care and replace them with the appropriate colors.
• Double-check that the cartridge passes freely from right to left.
• Fill the input tray with the minimum amount of paper possible.
• Next, double-check that your paper route is free of any impediments.
If the above steps don’t work, you’ll need to get your printer serviced to fix the HP E3 error.
